JYTEK logo

PRODUCT 제품소개

Digitizers/Oscilloscopes

PCIe-9814_bimg_en_2.jpg
견적 및 제품문의
  • img1kr.sales@jytek.com
  • img2031-708-9910
  • img3031-708-9940
PCIe-69814P

4-CH 12-Bit 80 MS/s PCI Express Digitizer

Features(특징)
-Up to 80 MS/s sampling, and 4 simultaneous analog inputs
-High resolution 12-bit ADC
-Up to 40 MHz bandwidth for analog input, 1 GB onboard storage memory
-Programmable input voltage range of ±0.5V, ±1V, ±5V, or ±10V
-Scatter-Gather DMA data transfer for high speed data streaming
-Provide 10 or 20 MHz digital onboard filter (FPGA)
-Provide PLL module for precise synchronization

 

ORDERING INFORMATION

PCIe-69814(EOl)

4-CH 12-Bit 80 MS/s PCI Express Digitizer

PCIe-69814P

4-CH 12-Bit 80 MS/s PCI Express Digitizer with PLL module

Accessory

ACL-eSSI-2/3/4

SSI bus cable for two, three, and four devices

 

The JYTEK PCIe-69814 is a PCI Express digitizer providing speedy, high quality data acquisition. Each of the four input channels supports up to 80MS/s sampling, with 12-bit resolution A/D converter. This allows simultaneous recording of signals on all channels with no inter channel phase delay. The extremely large on-board memory enables long recording times even at the highest sampling rates.

 

Unlike parallel PCI buses, PCI Express slots utilize serial point-to-point connection. Each connection pair (lane) can achieve burst connection speeds of 250MB/s. The PCIe-69814, based on x4 lane slot PCI Express technology, provides a clear advantage in that direct connection of each slot allows full transfer bandwidth for each individual card. The JYTEK PCIe-69814 x4 digitizer can be used in any standard PCI Express slot, x4, x8, or x16.